Accessories

	Die Clamps
	Die Clamps are used for holding dies in processing machine platens and are available in two different types with the following sizes in our range. View Specs

Clamp Type	Bolt Size	Length
Boat	12mm	100mm
	16mm	125mm
	20mm	160mm
	25mm	200mm
Slotted	12mm	100mm
	16mm	150mm
	20mm	200mm
	25mm	250mm
Toggle	16mm	120mm
Toggle	20mm	150mm

What is the enquiry cart?

	Heat Sealers
	Our Heat Sealers are used to seal plastic bags and film. They come in both hand operated and foot operated (to allow the operators hands to be free). They are all 240V and portable in their construction. View Specs

	Model	Sealing Width
Hand Operated	TISH200	200mm
Hand Operated	TISH300	300mm
Foot Operated	TISF450	450mm
Foot Operated	TISF600	600mm

What is the enquiry cart?

	Hopper Magnets
	These are essential to have installed to every plastics processing machine feed hopper to remove any ferrous metal contamination that can damage screws, barrels and dies. They come in different sizes from 5" to 11" to suit all types and sizes of hoppers. View Specs

Model	L (mm)	W (mm)	H (mm)	Type
5" Round	120	112	90	Round type - 5 bars
5" Square	120	112	90	Square type - 5 bars
7" Round	180	175	75	Round type - 7 bars
7" Square	180	175	75	Square type - 7 bars
8" Round	185	163	32	Round type - 4 bars
9" Round	230	218	75	Round type - 9 bars
9" Square	230	218	75	Square type - 9 bars
11" Round	265	265	75	Round type - 11 bars

What is the enquiry cart?

	Level Pads
	Our machine level pads are designed to remove machine vibration during running and to level the machine to the horizontal. This creates an environment that gives your machine accuracy, long life, reduction of operator fatigue and reduction of noise. They are made of powder coated steel with neoprene feet which are resistant to factory processing oils and heat. View Specs

Model	Load Capacity	Pad Diameter	Bolt Diameter
LP1	0-400kg	104mm	12mm
LP2	400-1000kg	145mm	18mm
LP3	1000-2000kg	195mm	18mm
LP4	2000-3000kg	228mm	24mm
LP5	3000-5000kg	250mm	30mm

What is the enquiry cart?

	Visionflow Water Meters
	Visionflow Water Meters are compact (108mm long) water meters that can be installed on important water lines to show the flow rate. They can incorporate temperature and pressure gauges if required. Their advantage is their compact size and ease of installation on any water pipe. View Specs

What is the enquiry cart?

Water Flow Meters - Plastics Equipment

Water Flow Meters

Onda Water Flow Meters are required to control the flow and temperature of water through your die and/or processing machine. This gives you the ultimate in die temperature control for the most accurate and fastest moulding conditions your processing machine is capable of.

They are available for all size processing machines and dies and have models from .2L/min to 30L/min and in combinations up to 12 zones per unit. Zones can be baffled and can handle both hot and cold water zones in the one water flow meter.

Construction is of glass filled nylon and the viewing tubes are unbreakable and made of clear nylon.

View Specs

Model	Maximum L/min per zone	Number of zones available
FSM400	8L/min	1-12
FSML400	20L/min	1-12
FSML400-300	30L/min	1-12

What is the enquiry cart?